OTP10-TG010 / 3-10OTPоƬ
语音芯片业务联络QQ 68681298
语音芯片业务联络QQ 3013945895
语音芯片技术联络QQ 34188255
语音芯片裸片开发网语音芯片联络电话 0755-28149272
环芯语音芯片联络传真 0755-29058191
环芯语音芯片ic业务联络手机 18922809111
环芯语音芯片淘宝店 公司淘宝店

TG010-OTP10 OTPоƬ Ʒ

Ʒ:

    TG010һ֧PWMDAC10OTPоƬ,ЧãĸI/O,2Input,2I/O,I/OֻܴƣΧһ104ݣƷɱ.AC AC

DataSheetԭͼTG010   --  TG010ԭͼ AC

Description

TG010 is a 10 Sec Easy Use Speech IC .It Support PWM or DAC voice output with high quality speech , There are 10 second Voice Length under 6 KHz sampling and 4 bit hardware compression. Its internal built-in a oscillator for system clock without an external resistor. Maximum 63 voice groups. One Group contain several steps(voice section ); Maximum 700 steps for all the Groups. Each Step can be define Trigger Mode, Output Status, Voice Section, Mute length, I/O Type & Simple Programming Function. User can select 8bit / 5bit / 4bit data compression. Support three mode trigger IC (Stand Alone, Serial Trigger Mode, CPU Command Mode ). Easy use development system is for function selection and voice combination . PC download the ROM code by the USB Port .

Functions

  1. MAX voice file : 700
  2. MAX Trigger Groups : 63
  3. Power On Trigger Group :1
  4. MAX Step : 700
  5. Signal step mute length : 0.64 s ( 6k sample rate )
  6. Operating Voltage range: 2.4V ~ 3.6V
  7. Total Voice Duration : 10 (60K Samples)
  8. I/O pin : 4
  9. Voice output : PWM or DAC
  10. Sequential Key : TG1 -> 32 Groups.

TG2 -> 29 Groups.
TG3,TG4-> 1 Group

  1. Debounce time : 50 us or 10 ms
  2. On/Off function : only for all TG PIN
  3. Sequential Key for Volume control function.
  4. Step can change Trigger I/O Type, Trigger Mode & Output Status.
  5. Hardware Trigger Group Repeat function.
  6. Simple Programming Function :
    1. (a) Write data to working register.
    2. (b) Working Register Increasing.
    3. (c) Step Jump by Working Register / Volume Status.
  1. Three Mode Trigger IC :

- Key Stand-alone Trigger Mode :

  1. Edge/Level
  2. Hold/Unhold
  3. Retrigger/Irretrigger
  1. Serial Trigger Mode :

Combinations of TG1 and TG2 to trigger maximum 63 Voice Group.

  1. CPU Command Mode :

User command through TG1,TG2,TG3 & TG4 with serial CPU Interface to control the Multi-Playback function.

    • Output status (for each Output pin):
    • Stand by Status. (High/Low Status)
    • Busy Low Active.
    • Busy High Active.
    • LED Flash at 6 Hz.
    • LED Flash at 3 Hz.
    • LED Flash at 1.5 Hz.
    • LED Flash at 0.75 Hz.
    • PWM for LED Dimming Control.

    Ʒƣ

    1, Otp-TG010 õ衢ΧûԪΧ·ֻҪҪ104ݣ

    ķøʡ30%50% .

    2, ѹ2.4V3.6VʽPWMDAC .(Ӧ5VʱҪLDOѹоƬ)

    3, гΨһһ8PinDIP,SOPװOTPоƬ.AT@CHIP

    4, Ψһһ¼ƬOTPоƬƷ,ַ,ʺ͵г.

    ʽ

    dip SOPCOBΪѹרãƬ¼ã ƬһWaferͬʱ¼4ͬIJƷֱӰؽԼʱ, dip SOPCOB 1콻Ƭ5-7콻

     

    һ¼оƬ/OTP

    زƷAC8040-OTP40   AC8020-OTP20   AC8080-OTP80

    ²Ʒ: AC9020-OTP20 AC9080-OTP80 AC9010-OTP10

    Other: TG010 TG020 TG040 TF020 TF040 TH040 TH080

    ²ƷϵOTPоƬȫ֧4.5V3V,Ϊṩȶ.

    оƬƬŶӽ߳ΪͬʱǽõIJƷͼ۸ΪҵõIJƷЧ档ӭѯ!

    ƽȻԭڴЯֺԻ͡

    оƬƬ         TG010-OTP10