OTP40-TG040 / 3-40OTPоƬ
语音芯片业务联络QQ 68681298
语音芯片业务联络QQ 3013945895
语音芯片技术联络QQ 34188255
语音芯片裸片开发网语音芯片联络电话 0755-28149272
环芯语音芯片联络传真 0755-29058191
环芯语音芯片ic业务联络手机 18922809111
环芯语音芯片淘宝店 公司淘宝店

TG040-OTP40 OTPоƬ Ʒ

Ʒ:

    TG040һ֧PWMDAC40OTPоƬ,ЧãĸI/O,2Input,2I/O,I/OֻܴƣΧһ104ݣƷɱ.

DataSheetԭͼ   --  TG040ԭͼ AC

Description

TG040 is a 40 Sec Easy Use Speech IC .It Support PWM or DAC voice output with high quality speech , There are 40 second Voice Length under 6 KHz sampling and 4 bit hardware compression. Its internal built-in a oscillator for system clock without an external resistor. Maximum 63 voice groups. One Group contain several steps(voice section ); Maximum 700 steps for all the Groups. Each Step can be define Trigger Mode, Output Status, Voice Section, Mute length, I/O Type & Simple Programming Function. User can select 8bit / 5bit / 4bit data compression. Support three mode trigger IC (Stand Alone, Serial Trigger Mode, CPU Command Mode ). Easy use development system is for function selection and voice combination . PC download the ROM code by the USB Port .

Functions

  1. MAX voice file : 700
  2. MAX Trigger Groups : 63
  3. Power On Trigger Group :1
  4. MAX Step : 700
  5. Signal step mute length : 0.64 s ( 6k sample rate )
  6. Operating Voltage range: 2.4V ~ 3.6V
  7. Total Voice Duration : 40 (240K Samples)
  8. I/O pin : 4
  9. Voice output : PWM or DAC
  10. Sequential Key : TG1 -> 32 Groups.

TG2 -> 29 Groups.
TG3,TG4-> 1 Group

  1. Debounce time : 50 us or 10 ms
  2. On/Off function : only for all TG PIN
  3. Sequential Key for Volume control function.
  4. Step can change Trigger I/O Type, Trigger Mode & Output Status.
  5. Hardware Trigger Group Repeat function.
  6. Simple Programming Function :
    1. (a) Write data to working register.
    2. (b) Working Register Increasing.
    3. (c) Step Jump by Working Register / Volume Status.
  1. Three Mode Trigger IC :

- Key Stand-alone Trigger Mode :

  1. Edge/Level
  2. Hold/Unhold
  3. Retrigger/Irretrigger
  1. Serial Trigger Mode :

Combinations of TG1 and TG2 to trigger maximum 63 Voice Group.

  1. CPU Command Mode :

User command through TG1,TG2,TG3 & TG4 with serial CPU Interface to control the Multi-Playback function.

  1. Output status (for each Output pin):
  2. Stand by Status. (High/Low Status)
  3. Busy Low Active.
  4. Busy High Active.
  5. LED Flash at 6 Hz.
  6. LED Flash at 3 Hz.
  7. LED Flash at 1.5 Hz.
  8. LED Flash at 0.75 Hz.
  9. PWM for LED Dimming Control.

 

  1. Play rate level :

TG040 can provide different play rate in one code as follow below Reference Sample Rate.
3K, 3.2K, 3.31K, 3.42K, 3.55K, 3.69K, 3.84K, 4K, 4.17K, 4.36K, 4.57K,
4.8K, 5.05K, 5.33K, 5.64K, 6K, 6.4K, 6.85K, 7.38K, 8K, 8.72K, 9.6K, 10.66K, 12K, 13.71K, 16K, 19.2K, 24K.

    • TG2 Low Reset
    • TG3 Volume Control

     

    Ʒƣ

    1, Otp-TG040 õ衢ΧûԪΧ·ֻҪҪ104ݣ

    ķøʡ30%50% .

    2, ѹ2.4V3.6VʽPWMDAC .(Ӧ5VʱҪLDOѹоƬ)

    3, гΨһһ8PinDIP,SOPװOTPоƬ.AT@CHIP

    4, Ψһһ¼ƬOTPоƬƷ,ַ,ʺ͵г.

    ʽ

    dip SOPCOBΪѹרãƬ¼ã ƬһWaferͬʱ¼4ͬIJƷֱӰؽԼʱ, dip SOPCOB 1콻Ƭ5-7콻

     

    һ¼оƬ/OTP

    زƷAC8040-OTP40   AC8020-OTP20   AC8080-OTP80

    ²Ʒ: AC9020-OTP20 AC9080-OTP80 AC9010-OTP10

    Other: TG010 TG020 TG040 TF020 TF040 TH040 TH080

    ²ƷϵOTPоƬȫ֧4.5V3V,Ϊṩȶ.

    оƬƬŶӽ߳ΪͬʱǽõIJƷͼ۸ΪҵõIJƷЧ档ӭѯ!

    ƽȻԭڴЯֺԻ͡

    оƬƬ         TG040-OTP40